Pilot Screw Installation; Carburetor Separation - Honda 1984 Shadow VT700C Manual

Turn each pilot screw in and carefully count the
number of turns before
it
seats lightly. Make a note
of this to use as a reference when reinstalling the
pilot screws.
CAUTION:
Damage to the pilot screw seat
will
occur
if
the pilot screw is tightened against the seat.
Remove the pilot screws and inspect them. Replace
them if they are worn or damaged.
INSTALLATION
Install the pilot screws and retu rn them to their
original position as noted during removal.
Perform pilot screw adjustment if new pilot screws
are installed (page 4-12) ,
NOTE :
Do not install new plugs on new pilot
screw holes until after adjustment has been
made.
If you replace the pilot screw in one car-
buretor, you must replace the pilot screw
in the other carburetor for proper pilot
screw adjustment.
CARBURETOR SEPARATION
Remove the two screws assembling the carburetors.
Carefully separate the No.1 and No.2 carburetors.
FUEL SYSTEM
\
PILOT SCREW
No.1
Cill'.URETOR
SPRING
THRUST COLLAR/SPRING
AIR JO I NT PIPE
No.2 CAI'BURETOR
4-9