Bracket Removal/Installation; Bracket Disassembly/Assembly; Ignition Switch Removal/Installation - Honda 1984 Shadow VT700C Manual

FRONT WHEEl/SUSPENSION
BRACKET REMOVAL/ INSTALLATION
Disconnect tile front turn signal wire connectors.
Remove the headlight bracket mount bolts and
bracket/turn signal assemblies.
Install the headlight bracket in the reverse order of
removal.
DISASSEMBLY/ASSEMBLY
Remove the retaining screws, horizontal adjusting
screw and sealed beam unit from the rim.
Assemble the headlight in the reverse order of dis-
assembly. After installation, adjust the headlight
aim (page
3-1S).
IGNITION SWITCH
R EMOVA l/INSTA LLATION
Remove
the
headlight and headlight case.
Remove the bolt attaching the right horn and horn.
Remove the ignition switch rubber cover.
Remove the instrument lower cover and disconnect
the ignition switch wire couplers.
Remove the ignition switch mounting bolts, and
ignition switch.
Install the ignition switch in the reverse o rder of re-
moval.
15-4