Camshaft Runout; Cam Lobe Height - Honda 1984 Shadow VT700C Manual

CYLINDER HEAD/VALVE
CAMS HA FT RUNOUT
Check camshaft ru nout with a dia l indicator.
Support bot h ends of t he camshaft with V-blocks.
Use 1/2 of the total indicator reading to det ermi ne
runout.
SERVICE LIMIT: 0 .05 mm (0 .002 in)
CAM LOBE HEI GHT
Using a micromet er, measu re the height of each cam
lobe .
SERV ICE LIMITS: IN / EX : 36,38 mm (1 .4282 in)
Wipe any oil from the journals, Lay a strip of plast i·
gauge lengthwise on top of each camshaft journal.
NOTE :
Avoid placing plastigauge over the oil hole in
the cam holder .
Hook the cam chain suspension wire against the cam
chain gu ide .
NOTE :
00 not hook the wire against the head rover
mating surface.
10-6