Shaft Holder - Honda 1984 Shadow VT700C Manual

CRANKSHAFTITRANSMISSION
After '83:
Remove the O·ring.
Place the output gear case in a vise with soft jaws,
being careful not to distort it.
Place the shaft holder tool on the driven gear shaft
wedging it against the vise to lock the shah.
Unstake the inner bearing race lock nut with a drill
or grinder. Be carefu l that metal particles do not
enter the bearing and the threads on the shaft are
not damaged.
Remove the inner bearing race lock nuts and dis-
card them.
Remove the output drive shaft bearing holder nuts
and sealing washers
from the case.
Remove the output drive shaft.
13-20
SHAFT HO L DER
LOCK NUT WR ENCH,
30/64
mm
COUNTERSHAF T
NUlrS":EA LI NG WASH EAS