Honda 1984 Shadow VT700C Manual page 241

FRONT WHEEL/ SUSPENSION
Install the front brake master cylinder with
the
" UP" mark on the holder facing up. Align
the
end
of the holder with the handlebar punch mark.
Tighten the upper bolt first, then the lower bolt.
Install the right handlebar switch assembly and con-
nect the brake light switch wires.
Connect the choke cable to the choke lever and
instali the clutch master cylinder. Align
the
end of
the holder with the punch mark
Ofl
the handlebar.
Tighten
the
upper bolt first, then the lower bolt.
Install the
left
handlebar switch and connect
the
clutch switch wi res.
Aoute the switch wires properly (page 1·9).
15-12