Clutch Disassembly - Honda 1984 Shadow VT700C Manual

CLUTCH DISASSEMBLY
NOTE'
All clutch components, except for the clutch
outer, can be serviced by removing the clutch
cover. The right crankcase cover does not
need to
be
removed.
Drain the engine oil and remove the clutch cover
and gasket.
Remove the
snap ring, clutch lifter plate, bearing,
lifter guide and lifter rod.
Shift the transmission into high gear and apply the
rear brake.
NOTE'
When the engine is not in the frame, shift the
transmission into gear and use the MAIN-
SHAFT HOLDER, PIN 07923- 6890100,
to
hold the final shaft .
Remove the lock nut and lock washer.
Remove the clutch spring se t plate, clutch spring
and two washers.
LOCK NUT WRENC H, 17
x
COMMERCIALLY AVAILABLE IN U.S.A.
CLUTCH
7 -11