Honda 1984 Shadow VT700C Manual page 109

CLUTCH
Coat the discs and plates with clean engine oil.
Install the clutch discs and plates as shown.
NOTE :
The No.2 and No.3 clutch discs from the in·
side have different grooves.
CAU TIO N:
Do not pull c/ulh center B out after installing
the discs and plates or plate
will
[all between
clutch centen A
and
B.
This will cause the clutch to no r this engage.
Install the clutch pressure plate.
Install the clutch spring set plate, clutch spring, and
washers.
NOTE:
Install the clutch spring with the dished face
towards the inside.
7-20
NO . 2 AND NO. 3 DISCS