Honda 1984 Shadow VT700C Manual page 74

Remove the slave cylinder mounting bolts and stave
cy linder with the clutch hose connected.
NOTE:
Do not operate the clutch lever after removing
the clutch slave cylinder. To do so will cause
difficulty in install ing the slave cylinder.
Disconnect the oil pressure, neutral and 0.0. switch
wi re coupler,
Disconnect the alternator wire coupler.
Disconnect the pulse generator wire coupler.
Place a fl oor jack or other adjustable support under
the engine.
NOTE -
The jack height must be continuously adjust-
ed so that the mounting bolts can
be
removed,
and so stress is relieved from other bolts until
they are removed.
Remove the right subframe.
Remove the engine mounting bolts.
Remove the engine from the right side while dis-
connecting the drive shaft universal joint from the
engine.
ENGINE REMOVAL/INSTALLATION
ALTERNATOR COUPLER
5-5