How To Re-Date Mail (Settings) - Neopost IS-330 User Manual

Re-dating Mail
Set-Up Requirements
The procedure below outlines steps required to re-date mail that has already been
processed.
The sequence is similar to sequence
Standard Postage on page 35 ), except for the following settings:
• Postage must be set to zero and have the date of mailing correct
• You do not have to weigh the mail piece.
• Print the new date on the back of the envelope.
You must begin by selecting the Type of stamp to gain access to the corresponding
parameters and be able to run mail.

How to Re-Date Mail (Settings)

Required settings:
1. Make sure you are on the home screen of the [Standard ] type of stamp
. The home screen indicates weight, postage and currently selected rate as illustrated
below.
Applying Standard Postage
Make sure you have already completed the preparation steps
mentioned in Preparing and Starting your Work Session
29 .
on page 35 (Applying
on page
3
41