How To Re-Date Mail (Settings) - Neopost IS-430 User Manual

Re-dating Mail
Set-Up Requirements
The procedure below outlines steps required to re-date mail that has already been
processed.
The sequence is similar to sequence
the following settings:
Postage must be set to zero and have the date of mailing correct
•
You do not have to weigh the mail piece.
•
Print the new date on the back of the envelope.
•
You must begin by selecting the Type of stamp to gain access to the corresponding
parameters and be able to run mail.

How to Re-Date Mail (Settings)

How to Re-Date
Mail (Settings)
Applying Standard Postage
Make sure you have already completed the preparation steps
Preparing and Starting your Work Session
mentioned in
Required settings:
1
Make sure you are on the home screen of the [Standard ]
type of stamp . The type of stamp is indicated at the top of the
home screen as illustrated below.
2
Check or change the type of stamp .
Press to access the
(p.32 ), except for
Customize stamp
screen:
3
p.25 .
39