Neopost IS-330 User Manual page 47

In other modes (Manual weight entry
From the [Standard ] home screen:
1.
Press
2. Insert the mail piece (or a label tape) into the mail path against the rear-guide wall,
3
with the side to be printed facing upwards.
If you want to seal the envelope, first engage the flap into the moistener (if installed).
Do not try to moisten self-adhesive envelopes.
3. The Mailing System applies postage and the mail piece (or label) is ejected.
When sealer is activated, collect the mail stack in the catch tray and put stack aside
to let envelopes dry.
40
. System motors start running.
If a mail piece is bigger than mail path maximum thickness (see
Mail Specifications
.
, no weight ...)
on page 203 ), you may use double label paper