Neopost IS-330 User Manual page 41

Frequently Asked Questions
System check list:
Do I have enough postage?
3
Do I need to clear the Batch
Counter ?
Is the sealing/moistening device
properly filled?
(if installed)
Is the Weighing Platform proper-
ly zeroed or tared?
Is there enough ink in the car-
tridge ?
34
Look at the funds counter at the bottom of the screen,
or:
Press
To add funds, see
(Meter)
Clear batch counters if you intend to issue a report
on the mail run you are about to start (see
Data Report
Select Reset counter on the home screen, or
See How to Reset Batch Counters
For sealing while printing the envelopes.
See Filling the Moistener (Option)
Before laying envelope(s) on the Weighing Platform,
your Home Screen should display 00 lb 0.0 oz . If
__lb _._oz is displayed, perform a 'rezero' of the WP.
See How to Rezero the Weighing Platform
143 .
To display the level of ink in the printing headset,
see How to Display Ink Level and Cartridge Data
page 180 .
You can be warned when the available funds gets below a preset
value (see How to Set the Low-Funds Threshold
and enter 1 to check your funds balance.
How to Add Funds to the PSD
on page 72 .
on page 95 ).
Batch
on page 65 .
on page 187 .
on page
on
on page 139 ).