How To Change System Time-Outs - Neopost IS-330 User Manual

Setting Default Time-Outs

How to Change System Time-Outs

To change the system time-Outs:
1. As Supervisor (see
Press
Default user settings
The Timeout setting screen is displayed.
8
2. Select each field and specify the length of each the time-out.
3. Specify the length of each time-out using the keypad and press [OK] to display the
next screen, until the Summary screen is displayed.
4. Press [OK] to validate.
136
How to Log in as Supervisor
and type 3.5 or select the path:
System settings
Use the [C] key to clear old settings then enter a new value.
Use the [C] key to clear old settings then enter a new value.
on page 126 )
Time-out settings