How To Set The Default Printing Offset; How To Activate / Deactivate Fractional Postage Values - Neopost IS-330 User Manual

Printing Offset
The printing offset is the distance between the right edge of the envelope and the imprint.
You can increase the distance by about 5 mm or 10 mm.

How to Set the Default Printing Offset

To change the default printing offset:
1. As supervisor (see
Press
Default user settings
2. Set the Default from a position list.
3. Press [OK] to validate.
Fractional Setting
The fractional setting enables users to type fractional values when entering postage
manually. Otherwise, the fractional value is always zero.

How to Activate / Deactivate Fractional Postage Values

To activate / deactivate fractional postage:
1. As supervisor (see
Press
Default user settings
Postage Mode
2. Select Enable / Disable fractional and press [OK] to activate or deactivate the
fractional.
How to Log in as Supervisor
and type 3.2.2 or select the path:
System settings
How to Log in as Supervisor
and type 3.3.4 or select the path:
Default imprint parameters
on page 126 ):
Print
on page 126 ):
Fractional
8
151