Connection Settings; How To Set The Postal/Online Services Connection - Neopost IS-330 User Manual

8.11

Connection Settings

Connection to the Postal Services or Online Services
To add funds or access Online Services, the Mailing System can use the following networks:
• An analog / fax telephone line through an analog modem
• An Internet access through a high speed LAN (Local Area Network).
First use the procedure below to select the connection, then configure the connection.
See also
• To physically connect a modem or the LAN to the base, see
page 21 .

How to Set the Postal/Online Services Connection

To set the postal/Online Services connection:
1. As supervisor (see
Press
Communication settings
The Server Access screen is displayed.
2. To use the analog telephone line modem, select Modem and press [Ok] (or type 1 ).
To use the LAN, select LAN and press [Ok] (or type 2 ).
3. Select Analog modem or LAN .
4. For further modem settings, see
157 .
For LAN settings, see
.
LAN settings can only be performed if the machine was actually
connected to the LAN at power-up.
How to Log in as Supervisor
and type 9.1 or select the path:
Type of connection
How to Set the Analog Modem Parameters
How to Set LAN (High-speed Internet) Parameters
Connection Diagram
on page 126 ):
8
on
on page
on page 156
155