Table of Contents
Advertisement
Performing Feed Correction to Alleviate Horizontal Bands and the Like
Procedure
1.
Print a test pattern.
–
—
2.
Read the correction values from the test pattern.
In the printing example shown below, "-0.40" becomes the correction value.
Gap present
3.
Enter the correction values that you read.
4.
Go back to the original screen.
Description
The movement transfer of media experiences subtle changes due to the thickness of the media and the temperature of
the media heating system. When the movement distance becomes discrepant, horizontal stripes are more likely to
occur during printing. We recommend performing correction to match the media you're using and the media heating
system. Also, perform the actual printing in an operating environment identical to that used for the test pattern.
5-5 Optimizing Printing to Match Media Thickness
Press
.
Press
several times.
Press
.
Press
to start printing.
Current correction value
Test pattern
Press
.
Press
.
Use
to make the setting for the correction value.
Press
to enable the setting.
Press
.
Press
to go back to the original screen.
Overlap
Choose the one that has
the smallest gap and the
least amount of overlap.
Chapter 5 Feature Reference
85
Advertisement
Table of Contents
