Removing Documents From The Hopper; Removing Envelopes From The Insert Or Sealing Table; Stoppage On The Insert Table Or Sealing Table - Neopost INSERTER IN-3 SI-92 Operator's Manual

7.2.4

Removing documents from the hopper

When an error occurs in the hopper the error screen shows
the following symbol:
stoppage in the hopper.
The envelopes can be removed in the following way:
• remove all envelopes from the hopper.
• open the hopper by pulling release handle A of the
hopper upwards (see Fig. 33 and Fig. 34).
• remove the envelopes from the lower part of the hopper.
• close the hopper with a firm click.
• press the reset key.
SI-92
Fig. 34
7.2.5 Removing envelopes from the insert or sealing
table
When an error occurs in the inner part of the machine, the
error screen can show the following symbols:
stoppage on the insert table.
stoppage on the sealing table.
stoppage in the envelope track.
7.2.6

Stoppage on the insert table or sealing table

Remove envelopes in the following way:
• lift the loc by pulling the release handle A of the loc (see
Fig. 32).
• remove the envelope.
• close the loc.
• press the reset key.
27/40