How to install the front cover
1. Check if the front filter is present.
2. Ensure that no lens is mounted.
3. Install the front cover of the projector doing the following:
a) first hook in the side of the front cover at the front filter,
b) then gently push the other side of the front cover into position,
c) ensure that the locking studs in the corners click into their receivers. (image 16-9)
4. Secure the front cover by locking the captive screw in the middle at the bottom of the front cover. (image 16-10)
5. Reinstall the rubber dust ring around the lens holder.
Image 16-9
Front cover installation
Image 16-10
Front cover, dust ring
16.6 Installation of the side cover
W
ARNING
Necessary tools
7 mm flat screw driver.
How to install the side cover
1. Check if the bottom and top filters are present.
R5905158 HDF W SERIES 10/07/2012
:
This procedure may only be performed by qualified technical service personnel.
16. Removal and installation of the projector covers
227