Reset Formatter - Barco HDF W series Installation Manual

14. Service
Load custom settings
1. Press Menu to activate the menus and select Service → USB Memory. (image 14-58, image 14-59, image 14-60)
2. Select Load Custom Settings and press ENTER.
An overview of the available sets of custom settings is given. (image 14-61)
3. Select a set and press ENTER to upload this set.
Image 14-58
Main menu, service
Image 14-60
USB memory selection

14.8 Reset Formatter

Why and when
A reset formatter is necessary when e.g. a color is missing, artifacts are visible in the image or image is frozen and the formatter
test patterns cannot be displayed.
How to reset
1. Press Menu to activate the menus and select Service → Reset Formatter. (image 14-62, image 14-63)
2. Press ENTER to select. Use the ▲ or ▼ key to select Yes. or No and press ENTER. (image 14-64)
If you want to reset the formatter, select Yes.
If you do not want to reset the formatter, select No.
214
Image 14-59
Service, USB memory
Image 14-61
Custom settings files
R5905158 HDF W SERIES 10/07/2012