Auto Dimming When Over-Temperature; Time And Date - Barco HDF W series Installation Manual

14. Service
Image 14-71
Main menu, service

14.12 Auto Dimming when over-temperature

What can happen?
When an over-temperature is detected, the projector starts dimming the lamp so that the projector can cool down.
How to activate - deactivate
1. Press Menu to activate the menus and select Service → Auto Dimming when Overtemperature. (image 14-73, image 14-74)
2. Press ENTER to toggle between [On] and [Off].
[On] : Dimming is started when an over-temperature is detected.
[Off] : No dimming is started when over-temperature is detected.
Image 14-73
Main menu, service

14.13 Time and Date

How to set
1. Press Menu to activate the menus and select Service → Time and Date. (image 14-75, image 14-76, image 14-77)
218
Image 14-72
Service, special HD camera mode
Image 14-74
Service, auto dimming when over-temperature
R5905158 HDF W SERIES 10/07/2012