Factory Defaults - Barco HDF W series Installation Manual

14. Service
Image 14-51

14.6 Factory defaults

What can be done?
All settings of the projector will be set to the original factory settings. All user settings are erased with this operation.
How to return to the factory defaults
1. Press Menu to activate the menus and select Service → Factory defaults. (image 14-52, image 14-53, image 14-54)
By default the following settings are excluded
- IP address
- Serial settings
- DMX settings
- Electronic convergence
2. If you want to restore also one of the items in the list, check the check box in front of that item.
Select Yes to restore the factory settings.
Select No to stop the restore process.
Image 14-52
Main menu, service
212
Image 14-53
Service, factory defaults
R5905158 HDF W SERIES 10/07/2012