Wired Subnet Mask Set Up - Barco HDF W series Installation Manual

Image 13-18
Main menu, projector control
Image 13-20

13.5.4 Wired subnet mask set up

Subnet for Wired and Wifi must be different !
How to set up
1. Press Menu to activate the menus and select Projector Control → Network. (image 13-22, image 13-23, image 13-24)
2. Use the ▲ or ▼ key to select Subnet Mask under Wired and press ENTER to activate the input box. (image 13-25)
3. Use the ▲ or ▼ key to change the selected character.
Use the ◄ or ► key to select another character.
Note: Digits can be entered with the digit keys on the remote control or the local keypad. When a digit is entered in that way,
the next character will be selected automatically.
R5905158 HDF W SERIES 10/07/2012
Image 13-19
Projector control, network
Image 13-21
13. Projector Control
169