Maintenance; Cleaning The Lens; Cleaning The Exterior Of The Projector - Barco HDF W series Installation Manual

15. MAINTENANCE

About this chapter
This chapter contains detailed maintenance procedures like dust filter replacement, lens cleaning etc. These procedures can easily
be performed by the operator of the projector.

15.1 Cleaning the lens

To minimize the possibility of damage to optical coatings, or scratches to lens surfaces, we have developed
recommendations for cleaning. FIRST, we recommend you try to remove any material from the lens by blowing
it off with clean, dry deionized air. DO NOT use any liquid to clean the lenses.
Necessary tools
Toraysee cloth (delivered together with the lens kit). Order number : R379058.
TM
How to clean the lens ?
1. Always wipe lenses with a CLEAN Toraysee
2. Wipe lenses in a one single direction.
Warning: Do not wipe back and forwards across the lens surface as this tends to grind dirt into the coating.
3. Do not leave the cleaning cloth in either an open room or lab coat pocket, as doing so can contaminate the cloth.
4. If smears occur when cleaning lenses, replace the cloth. Smears are the first indication of a dirty cloth.
C
AUTION
cloth.
Do not use liquid cleaners on the cloth as doing so will contaminate the cloth.
Other lenses can also be cleaned safely with this Toraysee

15.2 Cleaning the exterior of the projector

How to clean the exterior of the projector ?
1. Switch off the projector and unplug the projector from the mains power net.
2. Clean the housing of the projector with a damp cloth. Stubborn stains may be removed with a cloth lightly dampened with a mild
detergent solution.
R5905158 HDF W SERIES 10/07/2012
TM cloth.
:
Do not use fabric softener when washing the cleaning cloth or softener sheets when drying the
TM cloth.
15. Maintenance
221