Diagnosis; Versions - Barco HDF W series Installation Manual

Image 14-3
Identification

14.3 Diagnosis

What can be seen?
The diagnosis menu gives the possibility to get an overview of the working of the projector.
Overview
•

Versions

• Measurements
• Logging
• Board Id
• Notification
• Tilt sensor
14.3.1 Versions
About versions
The table gives an overview between the reference software and the current installed software.
The reference software is the latest correctly installed package.
The current is the updated software (upgrade of downgrade).
Once the complete current is updated with new software, then this current becomes the new reference.
= means that the current software is equal to the latest reference.
> the current has a higher version than the reference software.
< the current has a lower version than the reference software.
How to display an overview
1. Press Menu to activate the menus and select Service → Diagnosis → Versions. (image 14-4, image 14-5, image 14-6)
2. Press ENTER to display an overview of the versions. (image 14-7)
R5905158 HDF W SERIES 10/07/2012
14. Service
199