Tilt Sensor - Barco HDF W series Installation Manual

14. Service
Image 14-28
Notification overview list

14.3.6 Tilt sensor

What is possible?
The built-in tilt sensor can be read out to see if the projector is used in an allowed position. The status field indicates whether the
rotation of the projector is normal or abnormal.
Using a projector with an abnormal rotation can severely damage the lamp.
How to check the tilt sensor
1. Press Menu to activate the menus and select Service → Diagnosis → Tilt sensor. (image 14-29, image 14-30, image 14-31)
2. Press ENTER to read out the tilt sensor. (image 14-32)
The rotation of the projector is visually displayed. Coordinates of the tilt sensor and the offset from the normal position are given
in the tilt sensor pane.
The status pane indicates if the projector is used with an allowed rotation.
Image 14-29
Main menu, service
206
Image 14-30
Service, diagnosis
R5905158 HDF W SERIES 10/07/2012