12. Alignment
12.2 Orientation
What can be done?
The way of physical installation of the projector can be defined to the projector.
The following installation are possible:
•
front/table
•
front/ceiling
•
rear/table
•
rear/ceiling
•
auto front : automatic front, projector detects itself if it is ceiling or table mounted and projects always a readable image.
•
auto rear : automatic rear, projector detects itself if it is ceiling or table mounted and projects always a readable image.
How to set the correct orientation
1. Press Menu to activate the menus and select Alignment → Orientation. (image 12-1, image 12-2)
2. Use the ▲ or ▼ key to select the desired orientation and press ENTER to activate. (image 12-3)
Image 12-1
Main menu, alignment
134
Internal Patterns
Color Space
ScenergiX
Image 12-2
Alignment, orientation
Status
Projector
EBU
SMPTE
Custom
Status
White level
Black level
ScenergiX pattern
Adjust lines
Reset
R5905158 HDF W SERIES 10/07/2012