How To Set The Default Printing Offset; How To Activate / Deactivate Fractional Postage Values - Neopost IS-430 User Manual

Printing Offset
The printing offset is the distance between the right edge of the envelope and the
imprint.
You can increase the disance to 1".

How to Set the Default Printing Offset

How to Set the
Default Printing
Offset
8 Fractional Setting
The fractional setting enables users to type fractional values when entering postage
manually. Otherwise, the fractional value is always zero.

How to Activate / Deactivate Fractional Postage Values

How to Activate
/ Deactivate
Fractional
Postage Values
148
To change the default printing offset:
1
As supervisor (see
Press
> Default user settings > System settings > Print
2
Set the > Default from a position list.
3
Press [OK] to validate.
To activate / deactivate fractional postage:
1
As supervisor (see
Press
> Default user settings > Default imprint parameters >
Fractional Postage Mode
2
Select Enable / Disable fractional to activate or deactivate
the fractional postage.
How to Log in as Supervisor
and type 3.2.2 or select the path:
How to Log in as Supervisor
and type 3.3.5 or select the path:
p.128 ):
p.128 ):