Running [No Printing] Mail
3.5
Running [No Printing] Mail
In This Section
This section describes how to use the [No printing] type of stamp, for:
Sealing envelopes using the auto-feeder sealer (if installed).
•
Only conveying mail, for counting or testing purposes.
•
See also
About the use of the Type of stamp, see
•
Set-Up Requirements
The procedure below outlines steps required to process mail.
You must begin with selecting the Type of stamp to gain access to the corresponding
parameters and be able to run mail.
How to Process Mail without Printing (Settings)
How to Process
Mail without
Printing
(Settings)
Make sure you have completed the preparation steps mentioned
in
Preparing and Starting your Work Session
Main setting:
1
Make sure you are on the home screen of the [No printing]
type of stamp .
The type of stamp is indicated at the top of the home screen
as illustrated.
Choosing a Type of Stamp
p.23.
p.25 .
3
45