Printing Offset
The printing offset is the distance between the right edge of the envelope and the imprint.
You can increase the disance to 1".
How to Set the Default Printing Offset
To change the default printing offset:
1.
As supervisor (see
Press
Default user settings
8
2.
Set the
3.
Press [OK] to validate.
Fractional Setting
The fractional setting enables users to type fractional values when entering postage
manually. Otherwise, the fractional value is always zero.
How to Activate / Deactivate Fractional Postage Values
To activate / deactivate fractional postage:
1.
As supervisor (see
Press
Default user settings
Postage Mode
2.
Select Enable / Disable fractional to activate or deactivate the fractional postage.
220
How to Log in as Supervisor
and type 3.2.3 or select the path:
Default from a position list.
How to Log in as Supervisor
and type 3.3.5 or select the path:
on page 194 ):
System settings
on page 194 ):
Default imprint parameters
Print
Fractional