Printing [Received] for Incoming Mail
3.4
In this Section
3
This section describes how to use the [Received] type of stamp, to:
Print the date on incoming mail, and/or
•
Print 'Received' on incoming mail.
•
See also
About the use of the Type of stamp, see
•
Set-Up Requirements
The procedure below outlines steps required to stamp incoming mail.
You must begin with selecting the Type of stamp to gain access to the corresponding
parameters and be able to run mail.
How to Process Incoming Mail (Settings)
How to Process
Incoming Mail
(Settings)
42
Printing [Received] for Incoming
Mail
Make sure you have completed the preparation steps mentioned
Preparing and Starting your Work Session
in
Required settings:
1
Make sure you are on the home screen of the [Received ]
type of stamp .
The type of stamp is indicated at the top of the home screen
as illustrated.
Choosing a Type of Stamp
p.23 ).
p.25 .