How To Add Funds To The Psd (Meter) - Neopost IS-430 User Manual

Adding Funds
You can add funds to your Mailing System at any time by complete the steps listed
below.
The Mailing System then connects to the Postal Services and validates the operation.

How to Add Funds to the PSD (Meter)

How to Add
Funds to the PSD
(Meter)
To add funds to the PSD:
1
Either:
Press
Press
path:
or
> My Funds
2
Select > Add Funds (or type
3
If the system asks for a PIN code, enter the code using the
keypad and press [OK] .
Funds
The Screen is displayed.
By default, the system displays the value of the previous
transaction.
4
Enter the amount of postage to add using the keypad (use
to clear a digit, press
5
Press [OK] to start the connection to the Postal Server.
If the funding process is successful, the system displays a
successful message.
If funding fails, the system displays a failure message and
the amount that you may actually add, depending on your
postal account balance.
In the case of a communication error, the amount previously
entered cannot be changed. Check connection settings (see
p.151 ).
and type 7
2 ).
C twice to clear the field).
or select the
C
4
67