Safety Requirements - Neopost IS-430 User Manual

Safety Requirements

1.2 Safety Requirements
Power Connection
Before connection, check whether the Mailing System is suitable for the local AC
power voltage; refer to the type plates at the back of each system component.
Use an outlet located near the system that is easily accessible. As the power
•
supply cord is the system disconnecting device, do not route the power cord
between pieces of furniture or over sharp edges.
Avoid using outlets controlled by wall switches or shared by other equipment.
•
Make sure there is no strain on the power supply cord.
•
THIS SYSTEM MUST BE GROUNDED
• Only connect the power plug to an outlet provided with a pro-
tective ground contact.
To reduce the risk of fire, use only the power cord supplied with
•
the Mailing System.
Do not use ground adaptors.
•
Do not use this product on a wet floor or near water.
•
In case of liquid spillage, disconnect the power cord from the
•
outlet and proceed with cleaning.
1
5