Figure 1-10 Scsi-B Cable Installation - Silicon Graphics 1400 Server Family Maintenance And Upgrade Manual

10. Reinstall the back foam cover. As you do, position the SCSI cable so that it routes to
the electronics bay through the cutout in the back foam cover. The dotted arrow in
Figure 1-10 shows where the cable must go.
11. Position the cable along the recess in the back foam cover.
12. Reinstall the access cover using the original screws.
13. Connect all AC power and peripheral device cables to the back of the system.
1
Figure 1-10 SCSI-B Cable Installation
Peripheral Drives
3
2
5
6
4
5
21