Figure 1-8 Snap-In Plastic Slide Rails - Silicon Graphics 1400 Server Family Maintenance And Upgrade Manual

1
Snap-in Plastic Slide Rails
Figure 1-8
The components shown in Figure 1-8 are:
1. Tape drive or other removable media device
2. Tab on slide rail
3. Screws (quantity 4)
4. Slide rails (quantity 2)
Complete the installation of the new 5.25-inch drive using the following steps:
1. Position the drive so the plastic slide rails engage in the bay guide rails. Push the
drive into the bay until the slide rails lock in place.
2. Connect a power cable to the drive. The connectors are keyed and can be inserted in
only one way.
4
2
3
Peripheral Drives
17