Figure 2-8 Installing A Heatsink On A Processor S.e.c. Cartridge - Silicon Graphics 1400 Server Family Maintenance And Upgrade Manual

Chapter 2: Upgrading Baseboard Components
48
1
2
4
5
Figure 2-8 Installing a Heatsink on a Processor S.E.C. Cartridge
The locations shown in Figure 2-8 are:
1. Processor S.E.C. Cartridge
2. Processor Connector
3. The heatsink edge that goes TOWARD the connector on the S.E.C. cartridge (the
grease square is off-centered toward this edge)
4. Screw hole (five total attach the heatsink to a cartridge)
5. Example screw
6. Grease square (adhesive film must be removed before mounting)
7. Center screw hole: note that the grease square is off-centered from this screw hole
toward the edge (as indicated in callout 3)
6
7
3