Controlling A Ptz Camera; Toggling Between Zonal Mode And Pull Mode; Figure 2-11 Ptz Control Options - Honeywell Rapid Eye Operator's Manual

Controlling a PTZ Camera

TIP!

Toggling Between Zonal Mode and Pull Mode

PTZ Control
options
Document 800-02951V3 Rev A
11/09
Three PTZ controls are available to make PTZ commands: a dartboard-like control, a
rubber band control, and a Zonal Mode control. All three options are available while running
a Live session or while using LocalView.
The rubber-band control cannot be used at the same time as the zonal mode control,
and vice-versa.
Caution Not all PTZ cameras support every PTZ command offered. See your PTZ
camera's documentation for more information on its features.
Globally and for New Players
1. Open the View menu on the View application (not the Live session).
2. Select Options and click New Players.
3. In the Options for New Players window, select Zonal Mode (see
zonal mode is then set to be used in all new Live players, instead of the PTZ Pull
Mode. If needed, select the Pull Mode in the same way.
Figure 2-11 PTZ Control Options
Rapid Eye Remote View Operator Guide
Figure 2-11). The
41