Table of Contents
Advertisement
Video Playback and Searching
Searching for Video Clips Using the Report Function
Rev 2.00
The Simple Search screen is different from the Normal Search screen in the following ways:
•
When you generate a list using the Simple Search screen, dismissed events will
always be shown in the video clip list with a check mark. You will not be asked
whether or not you want to display dismissed events as you are when you use the
Normal Search screen.
•
The Simple Search screen does not have the Timelapse button found on the Normal
Search screen.
•
Only the events enabled are displayed.
There are two types of reports that you use to search for video clips:
•
Text reports create a list of clips based on certain text data that was found in the
transaction information.
•
Event reports create a list based on clip type. The search and extraction process
allows you to specify the event or timelapse information for the search.
For more information on the Report function, see
When you run a report, a list of clips displays (see
Figure 15-8
Review Clips Screen
Changing Event Clip Titles
If you later add your own event text to an event recording function (to use as a title for that
event) the event text will be used in this list. For example, if you set Motion Event 1 to use
Front Door as its event text, that text will be shown in this list instead of Motion 1.
If you are running a report that uses text criteria for its search, the first eight letters of the
triggering text is used to identify the clip in the video list (instead of the event type or the
event text). This helps you determine which text was used to identify the clip when the report
was run.
Creating a
Figure
90
Report, page 94.
15-8).
Document 900.0281
02/07
Advertisement
Table of Contents
