Removal/Installation Of Airbag - Chery automobile Service Manual

REMOVAL/INSTALLATION OF AIRBAG SYSTEM

1. REMOVAL/INSTALLATION OF AIRBAG

Removal:
----Disconnect the negative cable of the
battery (—)
Warning: When the ignition is turned off
and at the same time the fuse is
taken out, the airbag control
module (BCM) can provide the
sufficient voltage for 1 minute to
activate the airbag. If the airbag is
not disconnected, do not start the
maintenance work within 1 minute
after turning off the power supply
to the BCM. If the airbag has been
disconnected,
work can
immediately without waiting for
the discharging of 1 minute. The
failure of shutting off the SRS
system temporarily during the
maintenance work will result in
false ignition, physical injury and
SRS system discarded.
----Place the steering wheel at the center
Warning: When dealing with the airbag,
please face the front side of the
module upwards so as to provide
sufficient spreading space in case
of false activation. The airbag may
fly to the people or objects
resulting in injury or vehicle
damage
spreading space.
Remove the two airbag bolts on the steering
wheel.
Pull out the horn and the airbag wiring harness
plug from the airbag. Remove the airbag.
the maintenance
be carried
due to the lack
out
of
T-61