Chery automobile Service Manual page 263

----Suspend the engine and transmission assy,
loosen the bolts at the two supporting
points from the engine and transmission
to the sub-frame.
Caution: The removal process is extremely
dangerous which
damage or even death. Please make sure the
power assy is well fixed.
----Loosen the lock nut of the left-right
steering tie rod and the steering knuckle
arm, knock from one side to pry the ball
joint out of the steering knuckle arm (The
tightening torque is specified as 35±3
N·m).
----Stand the front sub-frame by jack and
loosen the four long-short bolts of the left
-right sub-frame with the cross beam.
(The tightening torque is specified as
130±10 N·m).
Caution: The removal of the cross beam is
extremely dangerous. The drop of cross
beam components could cause serious
damage or even death. Please make sure
that the jack has supported fully the cross
beam components before the removal.
could cause serious
M-14