Disassembly And Assembly Of Rear Speaker; Disassembly And Assembly Of Shift Lever; Disassembly And Assembly Of Glove Box - Chery automobile Service Manual

DISASSEMBLY AND ASSEMBLY OF REAR SPEAKER

Disassembly:
Remove the fastening screws at the top and bottom of the rear seat safety belt (applicable only
for the car model with safety belt). Loosen the four screws of the frame and dismantle it.
Assembly:
The assembly steps are reverse with the above and remember that the tightening for the safety
belt is 50±10N.m.
DISASSEMBLY AND ASSEMBLY OF
SHIFT LEVER
Dismantle and replace the anti-rust corrugated
leather sheath of the shift lever, remove the
fastening screws between the chassis and the
floor plate of the car, so that the corrugated
leather sheath can pass through the hole of the
chassis, after that dismantle the chassis.
DISASSEMBLY AND ASSEMBLY OF
GLOVE BOX
Disassembly:
Dismantle the fastening screws between the
glove box and the instrument panel and also
dismantle the power supply wires for
illumination lamp. Remove the glove box.
Assembly:
Assembly steps are the reverse of disassembly.
S-22