Chery automobile Service Manual page 270

Replace the rear housing of the lower control
arm
----When pressing out the rear housing of the
lower control arm, if the elastic housing
locks due to rust, please cut away the rubber
on outer circle, saw off the steel cover, and
then press out the elastic housing. (shown as
illustration)
----The installing position of the elastic housing
of control arm is shown as the illustration.
The arrow B or C points at the upper pit on
the lower control arm, and the kidney-shaped
interspace on the housing (arrow A) points to
the vehicle center.
----Use the special purpose tools to press in the
rear housing of the control arm.
M-21