Chery automobile Service Manual page 412

PARTS LIST OF SUPER 300
Position
1. GLASS PANEL
One of main parts of sunroof, is installed on the mechanical device, and airproof with the
seal of upper frame.
2. UPPER FRAME
Plastic part is used to support the mechanical devices and the glass panel, and achieve
good airproof with the body.
3. MECHANICAL DEVICES
Main parts of sunroof are installed on the upper frame with one on each side. They are the
actuators for sunroof glass inclining and opening. The glass panel is installed on the
mechanical devices.
4. MODULE MOTOR ASSEMBLY
The sunroof control panel is mounted on its surface, all programs to perform various
sunroof functions and motor actions are stored in the module's memory, and the motor is
the drive source for the sunroof opening and closing.
5. RACK + PINION
Installed on the upper frame with one on each side, one end is connected to the motor,
another end is connected to the mechanical devices, and transmits the power from the
motor to the mechanical devices evenly to open or incline the sunroof.
1
2
3
4
5
6:7
6:7
8
9
10
11
12
13
14
15
16
17
S-65
Name
Glass panel
Glass panel fastening device
Guide bolt
Mechanical devices left / right
Seal
Interior trim rim with gray sunshade
Interior trim rim with beige sunshade
Sunroof motor
Sunroof module
Cover of control buttons
Upper frame
Interior fastening frame
Wind strip
Sunshade assembly
Harness
Rack + pinion / cover
Fastening bolts