Video Plus+ System Setup - JVC DR-MH20S Instructions Manual

SUBSIDIARY SETTINGS
74
EN

VIDEO Plus+ System Setup

IMPORTANT:
Normally, Auto Set Up (A pg. 19), Preset Download (A pg. 20)
or Auto Channel Set (A pg. 75) sets the Guide Programme
numbers automatically. You need to set the Guide Programme
numbers manually only in the following cases.
●
When timer programming with the VIDEO Plus+ system, the
channel position, where the station you wish to record is
received on your unit, is not selected,
OR
when you add a channel after Auto Set Up, Preset Download
or Auto Channel Set has taken place,
^ Set the Guide Programme number for that station manually.
●
When you wish to timer record a satellite programme with the
VIDEO Plus+ system,
^ Set the Guide Programme numbers for all satellite
broadcasts received on your satellite receiver.
●
Turn on the unit.
●
Turn on the TV and select the AV mode.
●
Slide the TV/CABLE/SAT/DVD switch to DVD.
AUX
ENTER
CABLE/SAT
TV DVD
Selection Keys
FGDE
SET UP
Guide Programme Number Set
1
Press SET UP to access the Main Menu screen.
2
Press selection keys to select AINITIAL SET UPB, then press
G.
3
Press selection keys
to select ATUNER
SETB, then press G.
4
Press selection keys
to select AGUIDE
PROG SETB, then
press ENTER.
5
Press selection keys
to select AGUIDE
PROGB, then press
ENTER.
6
Press selection keys
to select the Guide
Programme number for
the desired station as
shown in the TV
listings. Then press
ENTER.
7
Press selection keys to select ATV PROGB, then press
ENTER. Press selection keys to select the number of the
unit's channel position on which the Guide Programme
number's broadcast is received by the unit or the satellite
receiver. Then press ENTER.
●
Pressing AUX changes ATV PROGB to ASATB.
●
To timer record a satellite programme with the VIDEO Plus+
system, you need to install the provided Satellite Controller and
perform the procedure described in ASatellite Receiver Control
SettingB (A pg. 24).
●
Repeat steps 5 – 7 as necessary.
8
Press SET UP to complete the setting.
Guide Programme Number
AGuide Programme (GUIDE PROG) numberB refers to the
assigned TV station numbers, according to broadcast area, for
the VIDEO Plus+ timer recording. The Guide Programme
Numbers can be found in most TV listings.
DVD VIDEO SET UP HDD/DVD SET UP FUNCTION SET UP
TUNER SET CLOCK SET
AUTO CH SET MANUAL CH SET
SAT CONTROL SET GUIDE PROG SET
11
12
13
SELECT WITH @ THEN PRESS [ENTER]
SET UP ENTER
PRESS [SET UP] TO EXIT
EXIT
SELECT
11
12 INITIAL SET UP > GUIDE PROG SET
13
GUIDE PROG
YLE2 1
TV PROG
RETURN
ENTER SELECT WITH @ THEN PRESS [ENTER]
SET UP
PRESS [SET UP] TO EXIT
EXIT SELECT
INITIAL SET UP
1