Default Setting Mode - SATO TG3 Series Operator's Manual

Section 3: Configuration and Operation

3.13 DEFAULT SETTING MODE

The printer can be reset to the default setting as in the factory preset.
1. Make sure the Power of the printer is turned off (O).
2. While pressing the ONLINE button and the FEED button simultaneously, switch the Power to On ( I ).
3. The printer enters DEFAULT SETTING mode.
Menu
Page 3-38
Press ONLINE + FEED button
+ Switch Power to On " I "
ONLINE or
FUNCTION button
Select PRINTER SETTING
+ FEED button
Select YES +
Select NO +
FEED button
FEED button
DEFAULT SETTING MODE
Select the item to be initialized.
PRINTER SETTING: Initializing printer setting
ALT. PROTOCOL: Initializing protocol code
The initial setting is PRINTER SETTING.
When PRINTER SETTING is selected, the printer displays the DEFAULT
PRINTER SETTING confirmation menu.
When ALT. PROTOCOL is selected, the printer displays the DEFAULT ALT.
PROTOCOL confirmation menu.
DEFAULT PRINTER SETTING confirmation menu.
Selecting YES and pressing FEED button will initialize the printer setting.
The initial value is NO.
If NO, it goes to DEFAULT SETTING without initializing the printer setting.
DEFAULT ALT. PROTOCOL confirmation menu.
Selecting YES and pressing FEED button will initialize protocol code.
The initial value is NO.
If NO, it goes to DEFAULT SETTING without initializing protocol code.
* Press , , or button to select
item accordingly. The active arrow
icons are displayed on the screen.
Select ALT.PROTOCOL
+ FEED button
Description
TG3 Series Operator Manual