Turning On The Power; Turning Off The Power - SATO TG3 Series Operator's Manual

Section 2: Installation
2.8 BASIC CONNECTIONS (cont'd)

2.8.4 Turning On the Power

Warning
Do not operate the power switch or insert/remove the power cable while your hands are wet.
Doing so may cause an electric shock.
Turn on the power switch located on the printer's operation
panel.
Press the side of the switch marked "I".
• When you turn on the power, the printer start-up and
detect for the loaded media and ribbon. If the media are
correctly loaded, "ONLINE" appears on the display.
• If the media and carbon ribbon are not loaded or prop-
erly loaded, the printer will prompt an error message.
Load the media and carbon (refer to Section 2.3 Load-
ing Media and Section 2.6 Loading the Carbon Rib-
bon) and then press ONLINE button.

2.8.5 Turning Off the Power

When you have completed the printing job, turn the printer
off.
1.
Press the ONLINE button to put the printer offline.
Be sure to confirm that the printer is in the offline status
before turning it off.
If there is any printed media remaining in the printer,
press FEED button to forward feed the media and cut it
off.
2.
Turn off the power switch on the printer's operation
panel.
Press the side of the switch marked "O".
Page 2-14
On
On
TG3 Series Operator Manual
Off
Off