Wireless Lan Setting; External Signal Interface (Ext) - SATO TG3 Series Operator's Manual

Section 7: Interface Specifications
7.7 LAN AND WIRELESS LAN ETHERNET SPECIFICATIONS (Cont'd)

7.7.7 Wireless LAN Setting

Variable identifier
SSID
Channel
Use WEP
WEP Key
For each communication mode and validity
SSID
Channel
Use WEP
*1. Communication mode is set by DSW.
*2. If there is a group with the same SSID already existing within the communication range, the value used by
the group will be assigned to Channel.
*3. If SSID is set to null (""), it is possible to connect to the equipment nearby without specifying SSID.
*4. If SSID is set to "ANY", it tries to connect to SSID "ANY".

7.8 EXTERNAL SIGNAL INTERFACE (EXT)

The external signal interface is designed to connect the printer to an optional stacker or rewinder.
Page 7-18
Setting range
Optional alphanumeric character
(Up to 32 characters)
1 ~ 14
DISABLE/64 bits/128 bits
Hexadecimal digit
64 bits?: 10 digits
128 bits : 26 digits
Ad hoc 802.11 Ad hoc
x
o
o
EXT External Signal Connector Pin Assignments
"NULL"
11
DISABLE
"00000000000000000000000000"
Infrastructure
ο
o
o
7 1
14 8
Default (Factory setting)
o
x
o
TG3 Series Operator Manual