Download Mode - SATO TG3 Series Operator's Manual

Section 3: Configuration and Operation

3.17 DOWNLOAD MODE

This download feature allows the operator to download data (firmware, font/logo, True type font), from the
host computer and write in the Flash ROM memory. When downloading is complete, the LCD screen will
return to the original display after three seconds. If an error occurs, a DOWNLOAD DATA ERROR will display
and identify the reason.
CAUTION:
• Downloading firmware will initialize all the previous settings (USER MODE, ADVANCED MODE).
Write down its setting details or keep a copy of FACTORY TEST PRINT for your information in
case you wish to maintain the same settings in the future.
• Do not turn the power on/off while downloading. This may damage the CONT board (main PCB).
* 3 short beeps sound is heard when the download is completed, or when the fonts are registered or deleted.
Page 3-52
Press button
+ Switch Power to On " I "
Program
download
FEED button
Download Font, Logo, TTF
Indication of Indication of
new entry overwriting
Go to the next
screen after 3 sec.
Deletion
Go to the next
screen after 3 sec.
TG3 Series Operator Manual