Environmental Specifications; Power Cables - Hitachi Simple Modular Storage 100 User Manual

Environmental Specifications

The following table describes the environmental specifications for the
Hitachi Simple Modular Storage.
Temperature, Operating
Temperature, Storage
Temperature, Transporting
Temperature Change Rate
Humidity, Operating
Humidity, Storage
Maximum Wet Bulb Temperature
Vibration, Operating (m/s2)
Vibration, Storage (m/s2)
Vibration, Transporting (m/s2)
Impact, Operating (m/s2)
Impact, Storage (m/s2)
Impact, Transporting (m/s2)
Altitude, Operating
Altitude, Storage
Acoustic Noise

Power Cables

Table B-7: Power Cable and Plug Identification
Input Rating
Configuration
100V-120V
(standard
attachment)
North America
200V-240V
North America
B–4
Table B-6: Environmental Specifications
Parameter
Plug Reference
Standards
1 ANSI C73.11
2 NEMA 5-15P
3 IEC 83
1 ANSI C73.11
2 NEMA 6-15P
3 IEC 83
Hitachi Simple Modular Storage 100 User's Guide
Specification
50° F to 104° F (10° to 40° C)
14° F to 122° F (–10° to 50° C)
–22° F to 140° F (–30° to 60° C)
50° F (10°C) per hour
46° F to 176° F (8° to 80° C)
46° F to 194° F (8° to 90° C)
84° F (29° C) noncondensing
2.5 or less (5 to 300Hz) (within 5 seconds)
5.0 or less (5 to 300Hz)
5.0 or less
20 or less (10 ms, half sine wave impact)
50 or less (10 ms, half sine wave impact)
80 or less (10 ms, half sine wave impact)
–984.25 to 9842 feet (–300 to 3,000 m)
-300 to 12,000
60 dB (environmental temperature: 32°C
or less)
Cable and Connector
a b
c
Three wire power cable
with a two-pole, three-
terminal grounding-
type connector.