Hitachi Simple Modular Storage 100 User Manual page 81

•
9. Read the information in the window. Then check Yes, I have read the
above warning and agree to update the Microprogram.
10.Click the Confirm button to proceed. A window similar to the following
appears as the firmware is updated. The window shows the approximate
duration required to update the firmware.
•
NOTE: On arrays with one controller, the Warning LED flashes when the
firmware is being updated.
•
CAUTION! Do not cancel or have your Hitachi Simple Modular
Storage 100 perform I/O operations while the firmware is being
upgraded.
11.After the firmware has been updated, a message informs you that the
operation has been completed successfully. Click the Close button to
remove the message. You can then return to normal operation.
Hitachi Simple Modular Storage 100 User's Guide
A–3