Safety Considerations - Hitachi Simple Modular Storage 100 User Manual

Safety Considerations

Observe the following guidelines to ensure safety. Failure to follow these
guidelines could result in bodily injury or damage to your Hitachi Simple
Modular Storage 100 chassis or components
• Do not wear loose clothing that could get caught in the chassis or
mounting hardware.
• Wear safety glasses when working under conditions that are hazardous
to your eyes.
• Do not perform any action that creates a potential hazard to people or
makes the equipment or rack unsafe.
• Do not work on the equipment or disconnect cables during a
thunderstorm, when wearing a wool sweater or other heavy wool
clothing, or when power is applied.
• Disconnect all power before installation.
• Avoid hazards such as moist floor and ungrounded power-extension
cables.
• To avoid damage to your Hitachi Simple Modular Storage 100 due to
electrostatic discharge (ESD), wear an anti-static wrist strap. Connect
the clip to an unpainted part of the array chassis frame to safely
channel any static electricity generated by your body to ground. If no
wrist strap is available, ground yourself by touching an unpainted part
of the array chassis frame.
• A fully populated Hitachi Simple Modular Storage 100 weighs
approximately 72.6 pounds (33 kg) and requires three or more persons
to lift the array. Always turn off your Hitachi Simple Modular Storage
100 and unplug all data and power cables before lifting.
• If rack mounting the array, mount the array at the bottom of the rack.
If the array is mounted at the top of the rack, the rack may become
unstable and fall.
Installing Your Array
Hitachi Simple Modular Storage 100 User's Guide
3–5